SYNSCAN SERIAL COMMUNICATION PROTOCOL V3.3 (NEW) (686.5 KB)
- This document describes the serial commands of Sky-Watcher SynScan hand control. This information applies to the SynScan V3, SynScan V4 series GOTO mounts.
Communication to the hand control is 9600 bits/sec, no parity and one stop bit via the RS-232 port on the base of the hand control.
This communication protocol applies to SynScan hand control with SynScan V3 firmware version 3.38 or SynScan V4 firmware version 4.38.06 or later.