• EQ8 SynScan GPS
  • EQ8 GOTO
  • eq8
  • EQ8
Where to buy
  • SKU: BD 180601  MAP: $6,779
  •  
  •  
  • Products Features
  • The EQ8 High Precision EQ mount is pier tripod - based. It comes with a SynScan hand hand controller,  2x10kg counterweights and a GPS, with a payload of 50kg. The patented Freedom Find (dual-encoder) technolgy allows the telescope to be moved manually whenever the user wishes - but with no need for re-alignment!


      50 kg Payload Capacity

      Super Smooth PE Curve

      PPEC

      Whisper Slew

      Small Backlash

      Auto-Home Function

      DSLR Interface

      Permanent Periodic Error Correction

      Precise polar-alignment with SynScan hand controller

      Adjustable Pier tripod (0.75m - 1.00m) 

     

     

    Freedom Find™ - tracking made easy!

    With the patented Freedom Find (dual-encoder) technology which allows the telescope to be moved manually or electronically in either axis without losing its alignment or positional information. After moving to a new object the telescope will automatically begin to track the new object accurately. No re-setup is required in one observing session.

     

     

      Freedom Find

    The EQ8 mount is equipped with auxiliary encoders on both the R.A. axis and Dec. axis. Therefore, the mount can keep tracking its current position even when a user unlocks the clutches and rotates the mount in R.A. axis and Dec. axis by hand.  With this feature, a user can manually operate the mount anytime without worrying about losing the mount’s alignment status. When the user wants to operate the mount with the SynScan hand control again, no alignment is required and all that is needed to be done is to re-lock the clutches. This feature can be enabled or disabled on the SynScan hand controller.
     
     Permanent Periodic Error Correction

    The EQ8 mount is equipped with an index on its R.A. worm. Thus the motor controller can keep tracking the current position of the worm. After a proper PEC training routine, in which the training data is stored in the motor controller permanently, a user can start the periodic error correction (PEC) at any time to improve the tracking performance for short focal length astrophotography. A training process is not required in the next observing session (assuming that the polar alignment is always accurate), thus this is a Permanent Period Error Correction (PPEC). A user can train the mount with manual guiding or auto-guiding. For detailed instructions please refer to the SynScan hand controller manual. 

     Batch Exposure Function

    The EQ8 mount is equipped with a SNAP port which can control the shutter release of a camera. Working with the SynScan hand control’s “Camera Control” function, a user can take batch exposures when doing astrophotography. Up to 8 groups of “Exposure-time & Frames” combinations can be set on the SynScan hand controller. For detailed information, refer to the SynScan hand controller manual.

     Auto-Home Function

    The EQ8 mount is equipped with two home position sensors. Working with the SynScan hand controller, the mount can be placed to the same home position after turning on the power. For detailed information, refer to the SynScan hand controller manual.

     

    • Mount only: Please consult your local dealer for information on mount only purchase. 

  • Specifications
  • Mount Type German Equatorial
  • Counter Weight 2x10 kg
  • Motor Drive 0.9 Hybrid Stepper Motor
  • GoTo SynScan hand controller
  • Tripod Height Pier Tripod
  • Tripod Weight 31 kg
  • Shipping Weight 4 boxes: 31kg+28kg+11kg+11kg
  • Shipping Cartondimensions 98x48x50 cm3; 66x61x71 cm3; 24x13x26 cm3; 24x13x26 cm3
  • Power Supply DC11-16v 4A
  • Payload Capacity 50 kg
  • Tracking Modes EQ
  • Tracking Rates sidereal, dolar rate, lunar rate
  • Slewing Speed Maximum 3.3 degrees/second
  • Guiding Speed 0.125x, 0.25x, 0.5x, 0.75x, 1x
* Standard accessories may vary.
* Contact your local distributor for details